System - D-Link DVA-2800 User Manual

Section 4 - Configuration
This page allows you to save the DVA-2800's current configuration, load a previously saved
configuration, reset the router to its factory default settings, or reboot the DVA-2800.
From the Admin page, click System. To return to the Admin page, click Admin.

System

Save Settings To This option allows you to save the current router configuration settings
Local Hard Drive: to a file on your computer.
Load Settings This option allows you to load a previously saved router configuration
From Local Hard file. This will overwrite the router's current configuration.
Drive:
Restore To Factory This option allows you to restore all configuration settings back to the
Default Settings: settings that were in effect at the time the router was shipped from the
factory. Any settings that have not been saved will be lost, including
any rules that you have created. If you want to save the current router
configuration settings, use the Save Settings To Local Hard Drive
button above.
Reboot The
Click to reboot the router immediately.
Device:
Click Save when you are done.
D-Link DVA-2800 User Manual
System
DVA-2800
Management >> System
System
Home Settings
HW:T1 FW:AU_2.01
System
This page lets you save your router's current settings to a file, restore your settings from a file, restore your
router to factory default settings, or reboot the device. Please note that restoring the settings to the factory
defaults will erase all settings, including any rules you have created.
Save Configuration To Local Hard Drive: Save
Load Settings From Local Hard Drive: Select File
Restore To Factory Default Settings: Restore
Reboot The Device: Reboot
COPYRIGHT © 2017 D-Link
Features Management
System Save
74