Ipv4 - D-Link DVA-2800 User Manual

Section 4 - Configuration
Click the IPv4 button to see the IPv4 information for each WAN interface. Click the green
arrows to select different interfaces.
WAN Interface: Displays the currently selected interface: Ethernet, DSL, or USB.
Cable Status: Displays the current cable connection status.
Connection Type: Displays the network protocol used to obtain an IP address.
Network Status: Displays the current network connection status.
Connection Displays the amount of time the connection has been connected.
Uptime:
MAC Address: The WAN interface's MAC address is listed here.
IP Address: The WAN IP address is listed here.
Default Gateway: The default gateway IP address is listed here.
Primary DNS Displays the current primary DNS server.
Server:
Secondary DNS
Displays the current secondary DNS server.
Server:
D-Link DVA-2800 User Manual

IPv4

DVA-2800 HW:T1
Internet Connected
Click on any item in the diagram for more information.
Internet
WAN Interface:
Cable Status:
Connection Type:
Network Status:
Connection Uptime:
Home Settings
FW:AU_2.01
Connected Clients:
Internet DVA-2800
PTM0 MAC Address: FF:FF:FF:FF:FF:FF
Connected IP Address: 172.17.5.120
Dynamic IP (DHCP) Subnet Mask: 255.255.255.0
Connected Default Gateway: 172.17.5.1
1 Day 3 Hour 50 Min 58 Sec Primary DNS Server: 172.17.5.5
Secondary DNS Server: 172.17.5.6
COPYRIGHT © 2017 D-Link
Features Management
1
USB Device
DSL/ IPv4 / IPv6
Go to settings
21