Auto Configuration (Slaac/Dhcpv6) - D-Link DVA-2800 User Manual

Section 4 - Configuration
Select Auto Configuration if your ISP assigns your IPv6 address when your router requests
one from the ISP's server. Some ISPs require you to adjust settings on your side before your
router can connect to the IPv6 Internet.
IPv6 Settings:
IPv6PD: Enable or disable IPv6 prefix delegation.
My Internet Select Auto Configuration.
Connection is:
Select either Obtain DNS server address automatically or Use
DNS Type:
the following DNS address.
If you selected Use the following DNS address, the following options are available:
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
Click Save when you are done.
D-Link DVA-2800 User Manual

Auto Configuration (SLAAC/DHCPv6)

IPv6 SETTINGS
Enabled
IPv6PD:
My Internet Connection is: Auto Configuration
DNS Type: Obtain a DNS server address
IPv6 SETTINGS
IPv6PD: Enabled
My Internet Connection is: Auto Configuration
DNS Type: Use the following DNS
Primary DNS Server:
Secondary DNS Server:
⌵
⌵
⌵
⌵
40