Dynamic Zone Programming (Dzp) - Motorola ASTRO APX O5 User Manual

Perform one of the following actions:
• Press the preprogrammed Reprogram
Request button to send reprogram request to
the dispatcher.
•
or to RPGM then press the Menu Select
button directly below RPGM to send reprogram
request to the dispatcher.
The display shows REPROGRAM RQST and PLEASE
WAIT.
If you hear five beeps, the dispatcher has
acknowledged the reprogram request. The display
shows ACK RECEIVED and the radio returns to the
Home screen.
If the dispatcher does not acknowledge the
reprogram request within six seconds, you hear a
low-pitched alert tone and the display shows NO
ACKNOWLEDGE. Try again or press
return to the Home screen.
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into
either of two categories:
Select
Enabled
Select
Disabled
The Scan or Private Call feature cannot be selected
while your radio is Select Disabled.

Dynamic Zone Programming (DZP)

to cancel and
This feature provides one or more Dynamic Zones to
store the frequent used channels be it conventional or
trunking. These dynamic channels are saved from
pre-existing (non-dynamic) channels in the radio. This
saves the time and effort from the regular navigation
Select-enabled radios are free to
change to any available channel,
including the dynamic-regrouping
channel, once the user has selected
the dynamic-regrouping position.
Select-disabled radios cannot change
channels while dynamically regrouped.
The dispatcher has forced the radio to
remain on the dynamic-regrouping
channel.
Note:
Your radio must be preprogrammed to allow
you to use this feature. This feature works on
the condition at least one zone in the radio
must be a non-dynamic zone.
61
English