Motorola ASTRO APX O5 User Manual page 3

m
®
ASTRO APX™
O5 Control Head Mobile Radio
Quick Reference Card
RF Energy Exposure and Product Safety Guide for
Mobile Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using the
radio, read the RF Energy Exposure and Product Safety Guide for
Mobile Two-Way Radios which contains important operating
instructions for safe usage and RF energy awareness and control
for Compliance with applicable standards and Regulations.
Radio Controls
Volume Knob
Dim Button
Home Button
Power On/Off Button
Indicators
LED Indicators
Menu Entries
Menu Select Button
Accessory Port (Microphone)
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
© 2009–2011, 2013, 2015 by Motorola Solutions, Inc.
All Rights Reserved. 06/15
1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.
Radio On/Off
Press the Power On/Off button to toggle the power on
or off.*
* The duration that user must press and hold the
Power On/Off button to turn off the radio is
programmable by a qualified radio technician.
Adjusting Volume
Turn the Volume Knob clockwise to increase volume or
counterclockwise to decrease the volume.
Selecting a Zone
Mode Knob
> <
1
or to ZONE.
Orange
Button
> <
2
or button until the desired zone is displayed.
H
3
Press or the PTT button to confirm the selected
zone number.
4
Press the PTT button to begin transmitting on the
displayed zone channel.
Selecting a Channel
>
1
Press and hold
Menu Select button directly below CHAN. The
Navigation
display shows the current zone and channel.
Button
2
Rotate the Mode knob to the desired channel.
3
Press H or the PTT button to confirm the channel.
to scroll to CHAN and press the
4
Press the PTT button to transmit on the displayed
zone channel.
Receiving and Transmitting
1
Take the microphone off hook.
2
Select zone/channel.
3
Listen for a transmission.
OR
Turn the Volume Knob.
OR
> <
or to MON then press the Menu Select button
directly below MON and listen for activity.
4
Adjust volume, if necessary.
5
Press the PTT button to transmit; release to receive.
Sending an Emergency Alarm
1
Press the Emergency button. A tone sounds and the
display alternates EMERGENCY and the home
display.
2
A dispatcher acknowledgment ACK RECEIVED
display follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm has been
received by the trunked system's central controller.
3
Press and hold the emergency button or the PTT
button to return to normal operation.
To exit emergency at any time, press and hold the
Emergency button.
*PMLN5592G*
PMLN5592G
English