Talkgroup Call Feature (Conventional Operation Only) - Motorola ASTRO APX O5 User Manual

Selective Call. See
on page 58.
Making a Selective Call
1 Perform one of the following actions:
• To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Selective Call button to
dial the preprogrammed ID. Proceed to step 4.
• To access this feature via the menu, proceed
to the next step.
2
or to CALL, and press the Menu Select button
directly below CALL.
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the
following actions:
• Press the Menu Select button directly below
CNTS to scroll through and select the required
ID.
• Press the Menu Select button directly below
LIST to go to the last number dialed.
58
English
Making a Selective Call •
or to the required ID.
• Use the keypad to enter the required ID.
4 Hold the microphone vertically 1 to 2 inches (2.5 to
5.0 cm) from your mouth.
5 Press and hold the PTT button to start the
Selective Call.
The display shows the ID of the target radio.
6 Release the PTT button to listen.
7 Press
to return to the Home screen.
If you do not press
radio will remain in Selective Call state with the
other unit. You will miss all subfleet traffic and
incoming phone calls.

Talkgroup Call Feature (Conventional Operation Only)

This feature allows you to define a group of
conventional system users so that they can share the
use of a conventional channel.
button to hang up, your