Selecting A Channel Via Channel Search Button; Mode Select Feature - Motorola ASTRO APX O5 User Manual

e) Press the PTT button to transmit on the
displayed zone channel.
Selecting a Channel via Channel Search
Button
This feature allows you to do a quick search for a
specific channel in your radio by keying in the alias of
the channel. If the name matches, your radio prompts
the first found matched channel name.
1 Perform one of the following actions:
• Press the preprogrammed Channel Search
button.
•
or to CHSR and press the Menu Select
button directly below CHSR.
A blinking cursor appears on the Channel Search
screen.
2 Use the keypad to type or edit your channel
name.
3 To initiate searching, press the Menu Select
button directly below CHSR once the entry is done.
48
English
To exit this procedure, press the Menu Select
button directly below CNCL.
The display shows SEARCHING. Once found, the
display shows the matched channel name and the
radio changed its transmission to the selected
channel.
If the radio is triggered to search for an empty entry,
the display shows INVALID ENTRY. Repeat step
search again.
If the entry does not match, the display shows
CHANNEL NAME NOT FOUND. Repeat step
again; or press or the Menu Select button directly
below EXIT to exit.

Mode Select Feature

Mode Select allows a long press to save the current
zone and channel of your radio to a programmable
button, keypad button, or a softkey; then once
programmed, the short-press of that button or softkey
changes the transmission to the saved zone and
channel.
There are two methods to save the selected zone and
channel:
2 to
2 to search