Motorola ASTRO APX O5 User Manual page 130

When the radio is in off-hook state, manual mode
change (including mode change triggered by third
party devices) is allowed. Radio reverts back to the
last mode before off-hook once the radio goes on-
hook.
Note:
During PL Defeats and Suspend Scan during
on-hook state, the radio is converted to work
in new channel and Channel Change on Off
Hook feature is suspended until these
conditions end.
We do not recommend that "Hub Suspend
Scan" and "Channel Change on Off Hook" to
be enabled simultaneously.
During Dynamic Regroup channel selector
lock state, Emergency, Transmit Inhibit, radio
lock, or when external key loaded is attached
to the radio, the Channel Change on Off Hook
feature is suspended until these conditions
end.
The Off For Dual Radio, the state of the HUB
Hook on the unselected radio is always
State for considered as on-hook. The state of
™
APX Dual the HUB of the selected radio is always
126
English
Radio reflected as the actual states of the
Setup HUB. When the HUB is placed off-
hook, the selected radio makes
channel change per CPS configuration,
and the unselected radio does not
trigger channel change.
With Channel Change on Off Hook
enabled, when the HUB is placed off-
hook, and there is radio switch, the
new selected radio moves to the target
channel zone on off hook, and the new
unselected radio reverts to the last user
selected channel before off-hook.
The Off When there are multi-control heads
Hook connected, the states of these HUBs
State for reflect the active control head(s) state.
Multiple Any HUB placed off-hook by active
Radios control head(s) makes the radio goes
Setup off-hook state. Only when all HUBs are
placed on-hook, the radio can be in on-
hook state.
Note:
This feature needs to be carefully enabled.