Connecting To Pc; Pc With Ethernet Adapter; Obtaining Ip Address Automatically In Os Windows Xp - D-Link DIR-615 User Manual
Wireless n300 router
Hide thumbs
Also See for DIR-615:
- User manual (184 pages) ,
- Quick installation manual (44 pages) ,
- Training manual (37 pages)
Table of Contents
Advertisement
DIR-615 Wireless N300 Router
User Manual
Connecting to PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router
and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
4. Turn on the router by pressing the ON/OFF button on its back panel.
5. Turn on your PC and wait until your operating system is completely loaded.
Obtaining IP Address Automatically in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network and Internet
Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
Figure 4. The Network Connections window.
Page 17 of 208
Installation and Connection
Advertisement
Table of Contents
