D-Link DIR-615 User Manual page 73

DIR-615 Wireless N300 Router
User Manual
Figure 58.
Parameter
Isolate connection
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Click the Next button to continue.
Configuring PPTP + Static IP WAN connection. The expert settings mode.
The Miscellaneous section.
Miscellaneous
When the checkbox is selected, the router uses an alternate routing
table for this connection. Select the checkbox only when your ISP
requires this.
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests
from the external network through this connection. For security
reasons, it is recommended not to select this checkbox.
Description
Page 73 of 208
Configuring via Web-based Interface