D-Link DIR-615 User Manual page 171

DIR-615 Wireless N300 Router
User Manual
You can specify the following parameters:
Parameter
Name
Enable
Type
VLAN ID
QoS
Figure 136. The page for adding a group of ports for VLAN.
A name for the port for easier identification.
Select the checkbox to allow using this group of ports.
The type of the VLAN.
Untagged NAT. The group of this type is an external connection
with address translation. It is mostly used to transmit untagged
traffic. When this value is selected, the VLAN ID field and the
QOS, Tagged port drop-down lists are not displayed.
Tagged NAT. The group of this type is an external connection with
address translation. It is mostly used to connect to the Internet. Later
the VLAN which identifier is specified in the VLAN ID field is used
to create a WAN connection (on the Net / WAN page).
value is selected, the Untagged ports section is not displayed.
Bridge. The group of this type is a transparent connection between
an internal port and an external connection. It is mostly used to
connect IPTV set-top boxes.
An identifier of the VLAN to which this group of ports will be
assigned.
A priority tag for the type of traffic transmitted.
Page 171 of 208
Configuring via Web-based Interface
Description
When this