D-Link DIR-615 User Manual page 33

DIR-615 Wireless N300 Router
User Manual
Control
Reboot device
Get config backup
Restore config
Reset to factory
Update firmware
Wi-Fi
Logout
Click the icon to reboot the device. All unsaved changes will be lost
after the device's reboot.
Click the icon to save the configuration (all settings of the router) to
your PC. The configuration backup will be stored in the download
location of your web browser.
Also you can create the configuration backup via the Backup
button on the System / Configuration page.
Click the icon to go to the System / Configuration page.
Click the icon to restore the factory default settings. Also you can
restore the factory defaults via the Factory button on the System /
Configuration page.
Also you can restore the factory default settings via the hardware
RESET button. The button is located on the back panel of the router
next to the power connector. Push the button (with the router
powered on) and hold for 7 seconds. Then release the button. All
LEDs of the router should turn off and then turn on again.
Click the icon to update the firmware of the router.
Also you can update the firmware on the System / Firmware
upgrade page.
Click the icon to disable or enable the device's WLAN.
Also you can disable/enable the router's WLAN on the Wi-Fi /
Basic settings page.
Click the icon to exit the web-based interface.
Page 33 of 208
Installation and Connection
Description