Camera Setup - Kenwood DNX8160DABS Instruction Manual

Camera Setup

You can set camera parameters.
1
Press the
volume knob.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera screen appears.
4
Set each item as follows.
R-CAM Interruption
ON: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
OFF (Default): Select this when no camera is
connected.
Parking Guidelines
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
Guideline Setup
If you select [ON] for Parking Guidelines, adjust
the parking guidelines. See
parking guidelines (P.86).
<MENU> button/
Adjusting the
Front Camera
On: Activates the front view camera. Select this
to use the front view camera.
OFF (Default): Select this when no camera is
connected.
Front Camera Mirror Image
If you select [ON] for Front Camera.
On: Displays the picture from the front view
camera horizontally reversed.
OFF (Default): Displays the picture from the
front view camera as it is.
Setting Up
85