Other External Components; View Camera - Kenwood DNX8170DABS Instruction Manual

Other External Components

View Camera

NOTE
• To connect a camera, see P.81.
• To use a rear view camera, a REVERSE lead
connection is required. (P.80)
• The view of the front view camera or dashboard
camera varies depending on the setting of
[Dashboard Camera /Front Camera].
• If [R-CAM Interruption] is set to on, the camera
screen is displayed when you shift the gear to the
reverse (R) position.
Ñ
Display the camera screen
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Camera].
View camera screen appears.
3
Adjust each item as follows.
3
Switching the View Camera
1
Touch to change the front view camera
dashboard camera [2]
Camera off
2
Touch to exit the camera screen.
Switching the Guideline
3
Touching each time turns on or off the
guideline. Available when [Rear Camera] is
set to [CMOS 3-Series Camera].
1
4
2
or
[1]
and rear view camera.
Other External Components
Switching the Angle
4
Touching each time changes camera angles:
Available when [Dashboard Camera /
Front Camera] is set to [CMOS 3-Series
Camera].
• Only for
[1]
• Only for
[2]
Ñ
Camera Setup
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera screen appears.
4
Set each item as follows.
Rear Camera (
CMOS 3-Series Camera: Select this when
the CMOS-3xx series with ID 1 set is
connected.
Other (Default): Select this when the other
camera is connected.
R-CAM Interruption
ON: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
OFF (Default): Select this when no camera is
connected.
R-CAM for Car interface
ON: Select when you connected an external
system unit. Neither buttons nor titles are
displayed.
OFF (Default): Select when you connected a
rear camera.
)
59
English