Kenwood DNX8160DABS Instruction Manual page 90

Location (Only for Front, Rear)
Select the speaker position you have fixed.
Tweeter (Only for Front)
You can set the tweeter when you are
selecting front speakers.
None, Small, Middle, Large
X'over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker
type.
Crossover network setup
For details, see
(P.90)
5
Select a item.
Car Type
You can setup the car type and speaker
network, etc.
• If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each channel)
to have the highest surround effects.
Speaker
Front
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Rear
None, OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Subwoofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
• Select "None" if you have no speakers.
Location
Front
Select the location from "Upper Door Area"/
"Lower Door Area"/ "On Dash"/ "Under Dash".
Rear
Select the location from "Upper Door Area"/
"Lower Door Area"/ "Upper Cargo Area"*
"Lower Cargo Area"* 1 / "Upper 3rd Row Area"*
"Lower 3rd Row Area"*
*1 "Compact"/ "Wagon"/ "SUV"
*2 "Minivan"/ "Passenger Van"
*3 "OFF"/ "Sedan"
Controlling Audio
/
1
2 /
/ "Parcel Shelf Area"*
2 3
89