Dvd/Video Cd (Vcd); Dvd/Vcd Basic Operation - Kenwood DNX8160DABS Instruction Manual

DVD/Video CD (VCD)

DVD/Video CD (VCD)

DVD/VCD Basic Operation

Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD mode before starting operation, see
(P.101).
• The screen shot below is for DVD. It may be different from the one for VCD.
1
When the operation buttons are not displayed on the screen, touch the
Control screen
1
3
4
1 Information display
Displays the following information.
• Title #, Chap #: DVD title and chapter number display
• Track #/Scene #: VCD track or scene number display
Scene # is displayed only when Playback control (PBC) is on.
• [Hide]: Hides the control screen.
• [ ] : Repeats the current content. Each time you touch the key, repeat mode switches in the
following sequence;
DVD: Title repeat (
VCD (PBC On): Does not repeat
VCD (PBC Off ): Track repeat (
2 Function bar
Various functions can be performed by using keys in this area. For details on the keys, see
(P.29).
• [ ] : Displays the Graphic Equalizer screen.
3 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see
4 Play mode indicator
• D, B, I, etc.: Current play mode indicator
The meanings of each icon are as follows; D (play), B (fast forward), A (fast backward), I (stop),
(resume stop), H (pause),
R
28 28
2
), Chapter repeat (
), Repeat off (
Function panel (P.30).
(slow playback),
Video screen
5
), Repeat off ( )
)
(P.92)
(slow reverse playback).
Switching the operation mode
6 area.
6
Function bar
5