Digital Radio Setup - Kenwood DNX8160DABS Instruction Manual

Digital Radio Setup

You can set Digital Radio related parameters.
1
Touch on the left side of the screen.
Touch [SETUP].
Digital Radio SETUP screen appears.
2
Set each item as follows.
Priority
If the same service is provided by Digital
Radio during Radio Data System reception,
automatically switches to Digital Radio. If the
same service is provided by Radio Data System
when reception of the service being provided
by Digital Radio becomes poor, automatically
switches to Radio Data System.
PTY Watch
If the service of the set program type begins
with the ensemble being received, switches
from any source to Digital Radio for service
reception.
Announcement Select
Switches to the set Announcement service. For
Announcement setup
details, see
Seamless Blend
Prevents audio break when switching from
Digital Radio to Analog Radio. Default is "ON".
Antenna Power*
Sets power supply to the Digital Radio
antenna. Set to "ON" when the Digital Radio
antenna in use is equipped with a booster.
Default is "ON".
L-Band Tuning
Sets L-band reception. When set to "ON", also
receives L-band ensembles.
Related Service
When you select ON, the unit switches to a
related service (if exists) when a DAB service
network is not available.
Default is "OFF".
* This item can be set when in STANDBY
source.
(P.62).
Radio
61