Table of Contents
Advertisement
Return to the Top page
Radio
R
adio Operation
Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
•
Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode
(P.71).
Simple Control screen
1
2
3
4
1 PS/Station name display
Displays the PS name or station name.
2 Information display/Control switching area
Displays the following information.
• Picture: The picture data or station Logo data is displayed if available from current content.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu
5 Sub function key
Touch to display "Sub function menu" (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
40
40
List Control screen
5
3
8
4
(P.41).
(P.41).
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Tunes in a station: T
• Selects a channel (HD Radio tuner only): Touch [CH∞] or [CH5].
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed.
Multi function menu
2
6
The functions of each key are as follows.
[P1] - [P6]
7
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
Displays the list of preset stations or channels.
[TI] (FM Tuner only)
Sets the traffic information mode on. For details, see
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see Auto memory
[PTY] (FM Tuner only)
Searches a program by setting program type. For details, see Search by program type
[CRSC] (FM Tuner only)
Switches to monaural to decrease noise when reception is poor.
[
SETUP]
Touch to display the SETUP Menu screen. See Setting Up
[
AUDIO]
Touch to display the Audio Control screen. See Controlling Audio
[ REAR
]
Touch to mute the rear speaker.
ouch [1] [¡]. The method of frequency switching can be changed. See Multi
function menu
(P.41).
Traffic Information
(P.42).
(P.54).
(P.64).
Return to the Top page
Radio
(P.43).
(P.43).
41
Advertisement
Table of Contents
