Maintenance - Dimplex XLF50 Service Manual

Maintenance

  
W ARNING: Disconnect power and allow heater to
cool before attempting any maintenance or cleaning to
reduce the risk of fire, electric shock or damage
to persons.
NOTE: The fireplace should not be operated with an
!
accumulation of dust or dirt on or in the unit, as this can
cause a build up of heat and eventual damage. For this
reason the heater must be inspected regularly, depend-
ing upon conditions and at least at yearly intervals.
Partially Reflective Glass Cleaning
The partially reflective glass is cleaned in the factory dur-
ing the assembly operation. During shipment, installation,
handling, etc., the partially reflective glass may collect dust
particles; these can be removed by dusting lightly with a
clean dry cloth.
To remove fingerprints or other marks, the partially reflec-
tive glass can be cleaned with a damp cloth. The partially
reflective glass should be completely dried with a lint free
cloth to prevent water spots. To prevent scratching, do not
use abrasive cleaners.
Fireplace Surface Cleaning
Use only a damp cloth to clean painted surfaces of the
fireplace. Do not use abrasive cleaners.
Servicing
Except for installation and cleaning described in this manu-
al, an authorized service representative should perform any
other servicing.
5