Adjusting The Volume Of The Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information; Pairing With Lex Handheld - Motorola APX 6000 User Manual

a) Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
headset to the radio.
You hear a short, medium-pitched tone. The
display shows SPKR ON.
Adjusting the Volume of the Radio from Bluetooth
Audio Device
Ensure that the Bluetooth audio device is connected
to the radio.
Your radio can only control the volume of MCW and
OCW Bluetooth enabled audio device. If the radio is
paired with other Bluetooth enabled audio device, its
volume is independent from the APX radio. In this
case, the volume is only adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows VOL XX and sounds a
short, medium-pitched tone.

Clearing All Bluetooth Devices Information

Clearing all Bluetooth devices information via the
preprogrammed Bluetooth On/Off button:
a) Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The
display shows PLS WAIT to indicate clearing is
in progress.
If successful, the display shows ALL CLR.
If unsuccessful, the radio sounds a short, low-
pitched tone.The display shows CLR FAIL.
Note:
If Re-Pair Timer is set to infinite and you clear
keys on the radio, you must clear keys on all
previously paired devices as well. (Please see
your accessories manual for further details.)

Pairing with LEX Handheld

Ensure that Bluetooth feature of your radio is on and
the Bluetooth tones are enabled.
1 Turn on the handheld and activate the Bluetooth
feature.
2 Place the handheld close to the radio aligning the
Bluetooth Pairing Location on the handheld with
the Bluetooth Pairing Location on the radio.
77
English