Attaching The Antenna; Removing And Attaching The Accessory Connector Cover - Motorola APX 6000 User Manual

Attaching the Antenna

Ensure the radio is turned off before attaching the
antenna.
1 Set the antenna in its receptacle.
2 Turn the antenna clockwise to attach to the radio.
3 To remove the antenna, turn the antenna
counterclockwise.
Note:
When removing the antenna, ensure that
the radio is turned off.
Removing and Attaching the Accessory
Connector Cover
The accessory connector is on the antenna side of
the radio. It is used to connect accessories to the
radio.
Note:
To prevent damage to the connector, shield it
with the connector cover when not in use.
1 To remove the accessory connector cover, rotate
the thumbscrew
disengages from the radio.
Note:
If the thumbscrew is too tight, use an Allen
wrench at
counterclockwise until it
to loosen it first.
English
19