Turning On The Bluetooth Audio; Turning Off The Bluetooth Audio - Motorola APX 6000 User Manual

• Keep holding the button although you hear
a short, medium-pitched tone with the
display shows momentary VISIBLE. This
indicates the visibility is turned on
successfully.
• If the visibility fails to turn on, the display
shows VISIBLTYFAILED.
• When the timer expires, the display shows
VISI OFF.
Receiving Pairing Request from other Devices
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and
pair with any request received from other device.

Turning On the Bluetooth Audio

Turning on the Bluetooth audio via the
preprogrammed button:
a) Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
radio to the headset.
76
2
Releasing the preprogrammed button turns off the Visibility mode.
English
[2]
You hear a short, medium-pitched tone. The
display shows HDSET ON.
BT audio routing can be configured in CPS to
route the audio to Remote Speaker Microphone
(RSM)/radio's internal speaker. The audio routes
to the radio's speaker if RSM is not connected.
Check with your dealer or system administrator for
more information on the programming of this
feature.
Note:
For BT PTT press, the active microphone
can be configured in CPS to transmit from
either the Remote Speaker Microphone
(RSM), the radio microphone, or the BT
headset. If the configured device is not
available, audio transmission reverts to BT
headset.

Turning Off the Bluetooth Audio

Turning off the Bluetooth audio via the
preprogrammed button: