Bluetooth Drop Timer - Motorola APX 6000 User Manual

Bluetooth Drop Timer

The Bluetooth Drop Timer has two different settings
and functions, depending upon the selection of the
Re-Pair Timer.
Re-Pair Timer
Options
Immediate
(For MCW Ac-
cessories only)
Infinite (For all
Bluetooth devi-
ces)
72
English
Description
0 – 15 minutes programmable buf-
fer time to re-establish the Blue-
tooth Connection when the Blue-
tooth signal is out of range.
If either device powers off, the pair-
ing keys are immediately cleared
from both devices and the devices
must re-pair.
This Timer only applies to the ac-
cessory. The programmable timer
choices are: 0 – 15 minutes, 2
hours, 4 hours or 8 hours.
Do note there are exceptions for
Operation Critical Wireless (OCW)
headset and PTT which are pre-
programmed to 8 hours.
Re-Pair Timer Description
Options
This timer is a "stay alive" timer
where the accessory remains on
without the device reconnecting be-
fore powering off. The radio re-
mains on until the user powers off
the radio. The radio and accessory
remains paired indefinitely. Once
the device re-connect, the timer is
reset.
The radio could not control the Drop Timer of
Personal Area Networking (PAN), Dial-Up Networking
(DUN), Commercial Off- The-Shelf (COTS) and data
services. It depends on the specifications of these
external devices.
Check with your dealer or system administrator for
more information about these timers.
To establish the Bluetooth Connection, see
with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature on page 73 or
Feature on page 74 .
Pairing
Standard Pairing