Connecting External Speakers Or A Sound Bar; Digital Audio - Insignia NS-40D420NA16 User Manual

Connecting external speakers or a sound bar

You can connect external speakers using:

• Digital audio

• Analog audio
Digital audio
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (Optical) jack on the side of your TV
and to the optical AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 On your TV's Audio menu, highlight Digital Audio Format/Audio Delay, then press ENTER or . Set the Audio
Format option to PCM. See the Digital Audio Format/Audio Delay option in
28
Digital optical
audio cable
Digital speaker system
Sound bar
www.insigniaproducts.com
Insignia 40" 1080p 60Hz LED TV
Side of TV
Adjusting sound settings on page 48.