NS-24ER310NA17/NS-24ER310CA17
NS-32DR310NA17/NS-32DR310CA17/NS-48DR510NA17
48" model
Note
If your TV is the 24" or 32" model, go to
On your TV
HDMI® cable
connector
HDMI1 (ARC)
jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect an HDMI® cable (not provided) to the HDMI1 (ARC) jack on the side of your TV and to the HDMI IN jack on
the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your TV speakers, on the Home menu, press
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
6 To configure the HDMI1 (ARC) jack to output sound to an ARC device, on the Home menu, press
Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.
Highlight HDMI ARC, then press OK to check the box.
52
ARC audio device
Sound bar
www.insigniaproducts.com
24" or 32" model
on page 51.
Side of TV
HDMI® cable
or
to highlight Settings, then press OK. Highlight
or
to highlight