48" Model - Insignia ROKU TV NS-24ER310NA17 User Manual

NS-24ER310NA17/NS-24ER310CA17
NS-32DR310NA17/NS-32DR310CA17/NS-48DR510NA17

48" model

Note
If your TV is the 24" or 32" model, go to
On your TV
Coaxial cable
connector
ANT/CABLE IN
jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out jack
on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Set up the TV tuner to watch broadcast TV. See
6 On the Home screen, press
32
Cable or
satellite box
Cable
wall jack
or to highlight the Antenna TV tile, then press OK.
www.insigniaproducts.com
24" or 32" model on page 29.
Coaxial cable
Setting up Antenna TV on page 65.
Side of TV