Connecting the Power Cord
❚
<WAM5500, WAM3500>
Connect the power cord of your speaker as shown.
1
Push the power cord into the notch at the edge of the speaker bottom.
2
This lets the speaker rest flat when you stand it up.
<WAM1500, WAM1501>
Connect the adaptor's input power cord to the adaptor. (WAM1500 Only)
1
Connect the adaptor's output power cord to the DC 19V jack on the speaker.
2
Push the power cord into the notch at the edge of the speaker bottom.
3
This lets the speaker rest flat when you stand it up.
NOTe
9 Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that
it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
ADD SPK/Wi-Fi SETUP SERVICE1
SERVICE2
SPK ADD/Wi-Fi SETUP SERVICE1
SERVICE2
POWER
SPK ADD/Wi-Fi SETUP SERVICE
DC 19V
< WAM1500 >
4444
11
POWER
SPK ADD/Wi-Fi SETUP SERVICE
< WAM1501 >
DC 19V