Epson Stylus PHOTO RX600 Service Manual page 53

EPSON Stylus PHOTO RX600/610, RX620/630
7. Remove the CR belt from the CR motor.
8. Remove a torsion spring from the carriage unit, and remove the carriage lever
from right side.
9. Unhook nine locations that secure the carriage unit to the head cable cover, and
remove the head cable cover.
10. Unhook two locations that secure holder I/C to the carriage, and shift the holder I/
C towards you.
11. Remove the carriage unit from the main frame upward.
Lubrication required. For lubrication, refer to the following
section.
6.3.3 Lubrication Points of the Printer (p83)
After removing the carriage unit, make adjustments referring to
A D J U S T M E N T
R E Q U I R E D
the following:
Adjustment Items for Individual Units and Components (p65)
Disassembly and Assembly
Holder I/C
Hook
Head Cable Cover
Disassembly and Assembly of Printer Unit
Carriage
Torsion Spring
Figure 4-11. Carriage Unit Removal-2
Revision C
Carriage Lever
Carriage Unit
53