Disassembly And Assembly Of Scanner Unit - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

4.4 Disassembly and Assembly of Scanner Unit

Panel Unit Removal (p.41)
Scanner Unit Removal (p.42)
Upper Housing Assembly Removal (p48)
HP Sensor Circuit Board (p49)
Flowchart 4-2. Scanner Unit Disassembly Procedure
Disassembly and Assembly
START
CCD Module (p49)
Motor Assembly (p49)
Disassembly and Assembly of Scanner Unit
Perform disassembly and assembly for the scanner unit in an
C A U T I O N
environment free from dust. You are advised to work in a clean
room or on a clean bench, if possible.
Ensure that there are no stains or scratches on the document
table. Do not touch interior glass panel surface when installing
the scanner housing. Handle glass panel surface with care by
attaching protective sheet or paper.
Lubrication required. For lubrication, refer to the following
section.
6.3.2 Lubrication Points of the Scanner (p82)
Revision C
47