Printhead - Epson Stylus PHOTO RX600 Service Manual

EPSON Stylus PHOTO RX600/610, RX620/630

4.5.3 Printhead

1. Carriage Unit Removal. (p52)
2. Remove the Head Cable from the CSIC board, then remove the Head Cable from
the Holder I/C.
3. Remove the Printhead and Carriage from the Holder I/C.
4. Remove 2 screws that secure the Printhead.
5. Remove the Printhead from the Carriage.
6. Remove the Printhead from the Head Cable.
After installing the Printhead, make the adjustment, referring to
A D J U S T M E N T
R E Q U I R E D
the following:
Adjustment Items for Individual Units and Components (p64)
Disassembly and Assembly
C.B.B TITE (P2), 2.5x8, F/Zn
Tightening torque:0.3 ± 0.05 N
Holder I/C
CSIC board
Disassembly and Assembly of Printer Unit
Head Cable
⋅
m
Printhead
Figure 4-12. Printhead Removal
Revision C
Carriage
54