Webasto Air Top 2000 S Installation Instructions Manual page 65

Air Top 2000 S
12.4. Control element connection
The wiring harness is (mechanically) prepared for connection to the
setpoint generator.
Simply pull on connector housing to unplug the connector.
The connector housing can be locked (self-locking action) by simply
pulling on the wiring harness.
NOTE:
The fibre optic cable must be in contact with the rotary knob.
NOTE:
As an option an external temperature sensor may be installed in the
passenger cabin (see page 48)..
Fig 26: Control element
Fig 27: Installation of the control element
Fig 28: Installation of the control element (incorrect)
Electrical connections
61