Advertisement
How to...
3. Vacuum Package with FoodSaver
1. Prepare container according to FoodSaver® Accessory Guidelines (see manual that comes with
your Accessory Kit).
2. Insert one end of Accessory Hose into Accessory Port on appliance. Insert other end into port
on accessory. Twist tab on Accessory Hose while inserting to ensure a tight fit.
3. Close lid, rotate Latch to OPERATE position.
4. When motor and Indicator Light turn off, vacuum process is complete. Note that the appliance
will still go through sealing cycle even when vacuuming an accessory. You will hear Motor shut
off and then the sealing cycle will begin.
5. Gently twist and remove Accessory Hose from accessory and appliance.
6. To test vacuum, simply tug on accessory lid. It should not move.
NOTE: For important tips on using accessories with different foods, please refer to the Storage
Guide, pages 18-19.
8
732P_fs_V2200B-UPDATE_IB_MECH.indd 10
www.FoodSaver.com
Accessories
®
10/8/14 11:03 AM
Advertisement
