Advertisement
How to...
1. Make a Bag from a FoodSaver
1. Using scissors, cut enough bag material from roll
to hold item, plus 3 inches. Be sure to cut straight.
2. Open appliance lid and place one end of bag
material across Sealing Strip.
3. Close lid and turn Easy Lock Latch to
OPERATE position.
4. Press Seal button.
5. When Seal Indicator Light turns off, sealing is
complete. Unlock Latch, lift lid and remove bag.
Now you are ready to vacuum package with your
new bag (see next page).
6
732P_fs_V2200B-UPDATE_IB_MECH.indd 8
®
www.FoodSaver.com
Roll
Place Bag on Sealing Strip
Close and Latch Lid
Press Seal Button
10/8/14 11:03 AM
Advertisement
