ACTi ENR-110 Administrator's Manual
  1. Manuals
  2. Brands
  3. ACTi Manuals
  4. DVR
  5. ENR-110
  6. Administrator's manual

ACTi ENR-110 Administrator's Manual

Hide thumbs Also See for ENR-110:
Table of Contents

Advertisement

Quick Links

Download this manual
ENR-100 Series
System Administrator's Manual
For V4.01.14 Firmware
ENR-110
ENR-120
ENR-130
ENR-140
2014/08/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENR-110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ACTi ENR-110

Summary of Contents for ACTi ENR-110

  • Page 1 ENR-100 Series System Administrator’s Manual For V4.01.14 Firmware ENR-110 ENR-120 ENR-130 ENR-140 2014/08/18...

  • Page 2: Legal Notice

    Disclaimer  The information contained in this document is intended for general information purposes. ACTi Corporation shall not be liable for errors contained herein or for incidental or consequential damages arising from the furnishing, performance, or use of this manual.

  • Page 3: Regulatory Compliance Information

    This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022 and EN 55024. In a domestic environment, this product may cause radio interference in which cause the user be require to take adequate measures. www.acti.com...

  • Page 4: About This Manual

    The reader is expected to know the fundamentals of IP surveillance system integration and to own the administrative privileges to install and configure all the devices. You may also visit ACTi Download Center for updates and documents: http://www.acti.com/downloadcenter Technical Support If you have any questions during system installation, please feel free to contact our engineers via our Customer Help Desk platform http://www.acti.com/CHD.

  • Page 5: Table Of Contents

    Supported Video Format ..............13 5 Get Started What’s in the Box ................14 At A Glance ..................15 ENR-110/120/130 ................ 15 ENR-140 ..................16 Power Button & Reset Button ............. 17 Turn On the Device ..............17 Turn Off the Device ..............17 Reset to Factory Default ..............
  • Page 6 USB Devices ................21 USB Storage Device ..............21 Hard Disks ................... 21 Install the Hard Disks ................22 ENR-110/120/130 ................ 22 ENR-140 ..................24 Network Connection Architecture ............26 LAN 1 Port ................... 26 Connection Setting Example 1 ............ 26 LAN 2 Port ...................
  • Page 7 Event-Recording File Length ............65 Set the Recording Schedule ............65 Set the Event Schedule ............... 66 Copy Schedule ................66 Event Management ................67 Event-Handling Schedule ............67 Set Event Rules ................68 Clear Event Rules ................ 70 www.acti.com...
  • Page 8 8 Remote Client Operation Access ENR Server ................86 Find ENR in Your Network ............86 Via UPnP Connection ..............87 Via ACTi IP Utility ................ 88 Log In / Out of ENR ................89 Log In ................... 89 Enter Account & Password...
  • Page 9 Copy Schedule ................119 Event Management ................120 Set Event Rules ................. 120 Set System Event rule Set Camera Event rule .............. 121 Response Types ................ 123 Copy Event Rules ..............125 Clear Event Rules ..............126 Disk Management ................127 www.acti.com...
  • Page 10 Export System Log ..............137 Customize Live Screen Layout ............138 Add Camera Views to Channels ..........138 Remove Camera Views ............. 138 Execute Sequence Patrol ............139 Save a Customized View ............139 Set a Default View ..............139 www.acti.com...

  • Page 11: Introduction

    Introduction Product Overview ACTi ENR-100 Series (hereafter referred to as ENR) is a compact and reliable multi-channel standalone NVR. It features a stable embedded Linux operating system and capabilities of supporting mega-pixel resolution H.264 streaming, an HDMI output for local display, PTZ control, scheduled / event-triggered / event speed-up recording, event management, synchronized playback, time / event-based playback search and video bookmarks.

  • Page 12: Remote Client Pc Requirements

    Microsoft Windows operating system has limits on memory and address space, regardless of the real or virtual memory available on a particular computer. Please use 64-bit system if your computer has more than 4GB RAM. Please make sure your operating system is fully patched with the latest service packs. www.acti.com...

  • Page 13: Supported Video Format

    ENR local live and playback can display up to four-megapixel resolution video. The channels using higher resolution video stream will appear blank, although the recording is proceeding normally. www.acti.com...

  • Page 14: Get Started

    These adapter plugs do not change the voltage, but will only change the shape of adapter to fit your electrical outlet. Please detach the plugs, take the plug type you need and connect it to the AC power adapter. USB Mouse x 1 www.acti.com...

  • Page 15: At A Glance

    ENR-100 Series System Administrator’s Manual At A Glance ENR-110/120/130 Front Panel Power Button USB 2.0 Ports LED Indicators Reset Button Rear Panel LAN 2 HDMI Output Power Connector www.acti.com...
  • Page 16 ENR-100 Series System Administrator’s Manual ENR-140 Front Panel www.acti.com...

  • Page 17: Power Button & Reset Button

    Press down the Power Button and release, the Power LED will light up and turn solid blue. Turn Off the Device As this unit is powered on, the Power LED and System LED are both lit, and the Power Button is in pressed state. To turn ENR off, please do the following: www.acti.com...
  • Page 18 The local display screen will turn black, with an information dialogue box showing up. Please observe the System LED on the front panel, when its orange light is off, you may press the Power Button to completely shut down the unit. www.acti.com...

  • Page 19: Reset To Factory Default

    The device power is on. Lights up for three The system resetting process is System Status seconds after Reset initializing. Orange Button is pressed Solid The system service is running. HDD LED Flashing Green The hard disk is in activity. www.acti.com...

  • Page 20: Installation

    The installation procedures may vary depending on your site conditions. The procedures provided in this manual are based on an example consisting of (1) local network, (2) an ENR unit, (3) ACTi network cameras, (4) a POE network switch and (5) necessary peripherals. Prepare the Devices Before starting connecting all the devices together, please read the instructions below to make sure your devices are ready for ENR system.

  • Page 21: Monitor

    Hard Disks For video recordings, you should install at least ONE certified 3.5-inch SATA hard disk. Please always use the hard disks ACTi tested to be compatible with ENR. You may find the certified models with ACTi Hard Disk Selector http://www.acti.com/hddselector.

  • Page 22: Install The Hard Disks

    Please follow the instructions below to install your hard disks in correct order to make sure the physical disk locations accord with the Disk ID shown in ENR server’s Storage Device List. ENR-110/120/130 Step 1 Remove the Case Cover Remove the four front...
  • Page 23 Disk SATA-2 Step 4 Install the Case Cover Back Install the case in reverse order of removal step (see Step 2), slide the case cover back until it clicks. Lock the back panel and then front panel with its screws. www.acti.com...
  • Page 24 Slide the Lock Tab to the right, the Hinge Tab will pop out by itself. Remove the four front panel screws, and then remove the three back panel screws. Pull the Hinge Tab to 90 degrees from the front, and pull out the tray. www.acti.com...
  • Page 25 Mount the disk by locking it with supplied disk screws to the bottom of the tray. Step 3 Install the Tray Press on Lock Tab, push the tray into the bay until it stops. Finally, close the Hinge Tab. www.acti.com...

  • Page 26: Network Connection Architecture

    ENR-100 Series System Administrator’s Manual Network Connection Architecture When connecting ENR with your network, please make sure you plug the network cable into the right port. ENR-110/120/130 LAN 2 Port (WAN Port) LAN 1 Port (Camera Port) Default: Default: Dynamic /192.168.1.10 192.168.0.10...

  • Page 27: Lan 2 Port

    ENR-100 Series System Administrator’s Manual ENR-110/120/130 LAN 1: 192.168.0.10 192.168.0.101 ~ 192.168.0.104 ENR-140 LAN 2 Port LAN2 port is a typical Ethernet port. You will have to use this port to connect with a different network segment when your system requires (1) the connection with a remote PC client or network cameras, (2) the use of event-triggered e-mail service via an external SMTP server (3) the use of date/time synchronization with external NTP server.
  • Page 28 In this setting, ENR with three cameras are within the same network segment, while there is another camera locating in another network. In addition, this system requires the connection with an external SMTP server and a remote client. ENR-110/120/130 LAN2: DHCP client (e.g.172.16.26.100)

  • Page 29: Connect The Devices

    Connect the Devices Follow the procedures to connect the devices. These devices are supposed to be connected in the sequence shown below. ENR-110/120/130 1. Connect the HDMI monitor. 2. Connect the USB devices. 3. Attach the network cable to LAN1 port.
  • Page 30 4. Press down Power Button. The power status LED will turn solid blue. 5. Attach the network cables to LAN1 Port. 6. Connect the network cameras to the switch and power them on. 7. Attach the network cables to LAN2 Port. (Optional, required for the access to another network) www.acti.com...

  • Page 31: Quick Setup

    By finishing the quick setup, you will enter live screen immediately. Step 1: Log in to ENR After the device starts, you will first see ACTi splash screen then system interface. On Login window. Click into the Account and Password fields to enter the default account / 123456, then click “Login”.

  • Page 32: Step 2: Format The Hard Disks

    Please select Auto Add to automatically add cameras or Search Cameras to select cameras by yourself. This will add detected H.264 video streams and display all video streams on Live screen right away Search all the cameras including supported other brand cameras within your current network segment. www.acti.com...

  • Page 33: Auto Add

    Live View channels arrangement. For example, you select cameras on the search list in this order: TCM-4511  TCM-5111  D11  E52, which will exactly become the channel order: 01 Camera  02 Camera  03 Camera  04 Camera www.acti.com...
  • Page 34 In Use: this camera/stream has been added to the system. Status Inaccessible: this camera is inaccessible. You will have to try accessing it using another Username or Password, (make sure this account is that camera’s root account), and click Search. www.acti.com...

  • Page 35: Local Client Operation

    ENR using the account you established. The Remember me and Auto-login function will be cancelled when you logout from ENR. Log Out On Live screen, click “Logout NVR” www.acti.com...

  • Page 36: Live Page Ui Overview

    System Status: Displays the following system status from left to right – (1) connected USB storage device, (2) LAN1 IP address, (3) LAN2 IP address, (4) total free disk space, (5) your user account and (6) current system time. www.acti.com...

  • Page 37: Input Devices

    The onscreen keyboards allow you to input characters without using a physical one. By clicking in a character field (e.g. Account or Server name) or number field (e.g. IP address or Port), the specific onscreen keyboard will be brought up. Standard Alphabet + Symbol Keyboard Number + Symbol Keyboard Symbol Keyboard www.acti.com...

  • Page 38: Mouse Settings

    On Live screen, click Setup  select System tab  click “Mouse”. Onscreen Keyboard Settings To disable the virtual keyboard if a physical one is already in use, on Live screen, click Setup  System tab  click “Keyboard”. Uncheck the box “Always shows software keyboard”. www.acti.com...

  • Page 39: Set Cameras

    ENR will synchronize with devices upon connecting to them. To make sure the settings on ENR side are prior to those on camera sides, please check “Auto save ENR settings into device upon connection”. When this function is enabled, every modification you make via camera web configurator will be overwritten by ENR. www.acti.com...

  • Page 40: Add Cameras

    (C) You can add a camera by manually filling the connections properties. For cameras which are not located within the same network segment with ENR server, you may add it manually. 1. Select a Camera ID from the Camera List on the left, and click “Add Camera Manually”. www.acti.com...
  • Page 41 ENR-100 Series System Administrator’s Manual 2. Fill in the connection properties such as properties IP Address, Port, Username and Password, and click “Get Camera Settings”. 3. The camera settings will appear. Click “Save” to save it to this camera channel. www.acti.com...
  • Page 42 (D) You can manually add a camera through RTSP protocol without to the camera brand. 1. Select a Camera ID from the Camera List on the left, and click “Add Camera Manually (RTSP)”. 2. Fill in the properties, make sure you select the correct URI type and Protocol type, and then click “Save”. www.acti.com...

  • Page 43: Copy Camera Settings

    You may copy an added camera’s settings to another empty channel. In this way, it is easier to manually add more than one camera of the same models. On Camera tab, enter All Camera list, select the cameras you want to dupliacate, and click “Duplicate” The new cameras will be added to the list. www.acti.com...

  • Page 44: Delete Cameras

    On Camera tab, enter All Camera list, select the cameras you want to delete, and click “Delete” . To deletae multiple cameras at once, you can use the mouse to drage out a selection range and then select “Delete”. www.acti.com...

  • Page 45: Change Camera Settings

    2. For local display viewing, please DO NOT (1) change the video resolution to higher than 4M pixels or (2) change the video codec to MJPEG or MPEG4, for these types of video streams are only displayable through ENR web interface. www.acti.com...

  • Page 46: (B) Fine-Tune The Image: Brightness/Contrast/Saturation/Hue

    By setting line frequency to 50Hz in such case, the shutter speed options will be proportional with light source frequency, such as 1/25s, 1/50s, 1/100s, etc. It is necessary to have the camera’s line frequency adjusted according to the power frequency of the light source to avoid flickering effect. www.acti.com...

  • Page 47: (C) Motion Settings

    The threshold level of this motion detection region. The lower threshold level Threshold is, smaller portion of the region would be considered as motions, which is (0-100%) more easily to be triggered, but may give more false alarms. Default is 10%. www.acti.com...

  • Page 48: Configure Ptz Presets

    Auto focus (available for cameras with auto focus capability) Zoom (Available for cameras with a controllable zoom) Zoom in Zoom out Manual focus (Available for cameras with a controllable focus) Near focus Far focus These buttons are enabled when the “Auto Focus” is disabled. www.acti.com...

  • Page 49: Go To Preset Points

    4. Click the desired preset point ID and input the point name in Preset Point Setting box. This preset point will be saved, and its ID will turn red. Delete a Presset Point On Preset Points Operation mode, click and then the preset point you want to delete. www.acti.com...

  • Page 50: Edit Ptz Preset Tour

    Click “Save” when this Tour list is well set. Click “Close” to exit this window. 7. The ID of a saved tour will appear red. Click on it to start the tour, and click to stop it. Delete Add Move Move to bottom down Move up Move to top www.acti.com...

  • Page 51: Device Information

    ENR-100 Series System Administrator’s Manual Device Information To change the device name, check firmware version information or Mac address, please go to Setup page  System tab Network After modifying the System Name, click “Save” to save the settings. www.acti.com...

  • Page 52: Network Settings

    The current settings of both LANs will be displayed here. By default, LAN1 card is set to Manual mode with a fixed IP address 192.168.0.10, while LAN2 is in DHCP client mode. It is suggested that you connect LAN1 to LAN and connect LAN2 to WAN. www.acti.com...

  • Page 53: Ip Settings

    PPPoE: Chose this when your ISP is using PPPoE type DSL line. Please contact you ISP to get the Username and Password for this connection. LAN1 default is Manual; LAN2 default is DHCP. IP Address Fixed IP Address. LAN1 default is 192.168.0.10; LAN2 default is Auto. www.acti.com...

  • Page 54: Change Port Setting

    Choose the gateway of the LAN card whose network is to connect Default Gateway with Internet. Default uses LAN2’s setting. Change Port Setting The default connection port used for remote web client to communicate with ENR is 80. To change it, click “Port Mapping” to modify and save the setting. www.acti.com...

  • Page 55: Enable Dhcp Server

    Set the Beginning IP Address and Ending Address, and click “Save”. ENR will assign IP addresses within this range to the cameras connected to the selected LAN port. Please (1) make sure the cameras are in DHCP client mode, (2) connect and power the cameras up after you enable this service. www.acti.com...

  • Page 56: Enable Ddns Service

    ● NO-IP: http://www.noip.com/ ● 2. Go to Setup page  Network tab  click “DDNS”. 3. Check “Enable”, select the service provider, and input the Host Name, User Name and Password. 4. Click “Save” to save the settings. www.acti.com...

  • Page 57: Date & Time

    Synchronize with NTP server In NTP Server section, fill in the NTP server IP or domain name in the NTP Server field, and click “Apply” to start synchronizing. www.acti.com...

  • Page 58: E-Mail Settings

    4. Click “Save” to save these properties. Field Name Description Input the sender’s e-mail address, should the same account you set for SMTP Sender Email server. Input the sender’s SMTP server address. Only alphabets, numbers, and the Server www.acti.com...
  • Page 59 Hotmail account name is a complete e-mail address, while other mail servers’ are not. Only alphabets, numbers, and the symbols (@), (.), (_), (-) are valid. Password Input the password of the SMTP server account. Only alphabets and numbers are valid. www.acti.com...

  • Page 60: Disk Management

    ● SATA1 represents the disk installed in upper bay for saving recordings. ● SATA2 represents the disk installed in lower bay for saving recordings. ● Storage Media represents the connected USB disk that you inserted for carrying firmware image file, backup file, exported system log file, snapshots or video. www.acti.com...

  • Page 61: Format Hard Disks

    5 days, ENR will still delete the oldest files whenever the space is full. Before setting up the rules, you can make use of a handy storage calculator provided by ACTi to find out the estimated storage your system requires: http://www.acti.com/project_planner...

  • Page 62: Check Disk Status

    You may manually perform an instant S.M.A.R.T check by clicking “Refresh”. Once the disk a appears in “WARNING”, “FAILED”, or “UNKNOWN” status, it is not reliable for recording, and may fail when the number of bad sectors on the disk has grown high enough. Healthy Disk Abnormal Disk www.acti.com...

  • Page 63: Manage Abnormal Disks

    1. Turn off the device. 2. Replace the abnormal disk with a new one, and turn on the device. 3. Go to Live screen, click Setup  click Maintenance tab  click “Storage”, and click “Format” to format the new disk. www.acti.com...

  • Page 64: Schedule Recordings

    By default, once a device is added to the system, its schedule is automatically set to full-time schedule recording and event handling. You should configure it according to your system plan. On Live screen  Select Setup  click “Schedule” tab and select one channel. www.acti.com...

  • Page 65: Event-Recording File Length

    1FPS after the event ends. Event Recording Only events are recorded, at the video frame rate you define in Camera Settings. 2. Click and drag over the “Time Track” to set time period. 3. Click “Save”. www.acti.com...

  • Page 66: Set The Event Schedule

    On Schedule tab, select a source camera from camera list, its schedule will be copied to others. Click “Copy” On Copy Schedule window, select the target cameras. Click “Copy” on Copy Schedule window. www.acti.com...

  • Page 67: Event Management

    By default, the event-handling schedule of each camera is enabled for 24 hours once it is added to ENR system. To configure the Event Handling Schedule, on Live screen, click Setup  click “Schedule”, select the camera, and drag on the 24-hour time table. www.acti.com...

  • Page 68: Set Event Rules

    Check the “Enable” to enable this function, and the device whose connected DO(s) will be triggered. You may select one DO to be activated after the other and the duration time between them. Clik “OK” to confirm. www.acti.com...
  • Page 69 ENR server to execute a PTZ response, a red sign would appear on the tab , please add a PTZ camera). Select which PTZ camera in ENR server to make the movement, then the preset points and duration time between them. Click “OK” to confirm. www.acti.com...

  • Page 70: Clear Event Rules

    4. On Event tab, click “Save” to save the settings. Clear Event Rules On Event tab, you may select an event rule under certain camera, and click “Clear This” to delete it, or “Clear All” to deleta all the rules belong to this camera. www.acti.com...

  • Page 71: Copy Event Rules

    1. On Event tab, select a source camera from camera list, its rules will be copied to others. 2. Click “Copy” 3. On Copy Event window, select the target cameras. 4. Click “Copy” on Copy Event window. www.acti.com...

  • Page 72: Joystick

    There are 12 buttons available on each controller; you may assign a function selected from dropdown list to any button. Every time you change the settings on this page, please click “Save” to save the settings of this joystick model. www.acti.com...

  • Page 73: System Log

    You may choose “All Days” to show all the logs or choose “Day Range” to specify a range. 2. Select Log Types 3. Define other conditions. For example, you can view the logs of all remote clients by selecting “Remote” for Source. 4. Click “Search” to start searching.will automatically refresh accordingly. www.acti.com...

  • Page 74: Export System Log

    ENR-100 Series System Administrator’s Manual Export System Log To export the logs, insert a USB disk into ENR, click “Export” and save the xml file to your local computer. You may view this file on a computer with Notepad or XML Editor. www.acti.com...

  • Page 75: User Group Management

    1. Select “Group” , click “Add” to bring up Add New Group window, enter the Name and Description of the group, and click “OK” to add it to the Group List. 2. On Group List, select this group. In Group Permission section, enable the permissions possessed by this group. www.acti.com...

  • Page 76: Edit / Delete A Group

    1. Account field allows alphabets, numbers, and symbols except the following: The maximum length of characters is 15. 2. Password field allows alphabets, numbers and symbols. The maximum length of characters is 40. 3. Both the Account and Password field are non-case-sensitive. www.acti.com...

  • Page 77: Edit / Delete A User

    ENR-100 Series System Administrator’s Manual Edit / Delete a User You may edit an existing user or delete it. Select the user on User List, click “Edit” or Delete”. Please always click “Save” before leaving this page. www.acti.com...

  • Page 78: Upgrade Firmware

    ENR-100 Series System Administrator’s Manual Upgrade Firmware You may check ACTi corporate website for latest ENR firmware package and download it. Unzip the package and save the *.upg file to the root directory of a USB disk and insert it into ENR USB port.

  • Page 79: Backup / Restore Settings

    To start backing up system setting, please insert a USB disk into ENR first. 1. On Live screen, click Setup” click Maintenance tab  click “Settings Backup / Restore”. 2. Click “Backup”, the backup file will be saved to your USB disk as .nvr file. www.acti.com...

  • Page 80: Restore

    2. All the .nvr file detected from your USB disk root directory will be shown on the File Name dropdown list, select your desired one. 3. Click “Restore” to start restoring the settings. The server will restore the settings from the backup file and reboot. www.acti.com...

  • Page 81: Customize Live Screen Layout

    To select a desired layout, click one on Live Menu. Each layout will display specific windows shown below. Therefore, you have to make sure the cameras you desired to watch are placed in the designated channels before applying the layout. www.acti.com...
  • Page 82 The five customized views for local live view and those for remote live view are maintained separately; therefore, any modification you make to the views on View here list will not affect the View settings on remote Live screen. www.acti.com...

  • Page 83: Execute Sequence Patrol

    If you have enabled “Auto-login” function (please refer to Set Auto Login on page 35), you may also set one View as default, in this way, you may immediately start live monitoring after the system starts up. To set a default view, simply select a desired view on View list, and click www.acti.com...

  • Page 84: Customize System Language

    Please edit the wording of your language embedded in quotation marks (“ ”) on the right of the colon; The English term appearing on the left is the original system code, which should be left unchanged. www.acti.com...

  • Page 85: Restore The Wording

    ENR always keeps the original language file in its memory, so you can restore the language wording to default. On Language Adjustment page, select the language file from drop-down list below Restore Language section, and click “Restore”. The entire original language wording will restore after you log into the system again. www.acti.com...

  • Page 86: Remote Client Operation

    If you know the IP address and port number of the ENR, you may type in the IP address and port number directly into Internet Explorer. Sample IP will look like this: http://220.228.146.21:1000 or domain name http://enr.acti.com. If the port number is 80, you do not need to append it when typing the address. http://ip address:port number Find ENR in Your Network The ip address of both ENR’s LAN ports are shown on local live screen.

  • Page 87: Via Upnp Connection

    ENR-100 Series System Administrator’s Manual If your client computer and ENR are both within the same network, find ENR’s IP address via the following two quick methods - UPnP connection or ACti IP Utility. Via UPnP Connection ENR supports UPnP connection. This means that once the device has an IP address, you will be able to find it in the local network in Windows Explorer →...

  • Page 88: Via Acti Ip Utility

    ENR-100 Series System Administrator’s Manual Via ACTi IP Utility ACTi IP Utility is a software tool used to find all ACTi products including cameras and ENR servers. Download the latest IP Utility from the link below and install it on your computer.

  • Page 89: Log In / Out Of Enr

    To change UI language, select the desired language from “Language” dropdown list. Remember Login Information To have the server remember your Account, Password and language setting for future, check “Remember me”. Log Out On Live screen, click “Application” “Logout”. www.acti.com...

  • Page 90: Accept Activex Controls Installation

    ENR interface requires the add-on ActiveX Control components, please allow ActiveX controls to be downloaded and installed. It is strongly recommended that (1) you add this ENR server into Internet Explorer’s Trusted Sites and (2) turn off Windows Firewall on this client computer. www.acti.com...

  • Page 91: Setup Wizard

    For video recording, please remember to install hard disks and format them in physical ENR device. You may click the Done bubble to skip to the quick setup procedures last step. And click “Done” to exit Setup Wizard. www.acti.com...

  • Page 92: Setup The System

    Go to Setup page  System tab Information Modify the name of this ENR server and click “Save”. The maximum length is 10 digits of English alphabets. Your ENR’s current firmware version, serial number and MAC address are also shown here. Maximum length: 10 digits www.acti.com...

  • Page 93: Set Date & Time

    To delete this NTP server, simply clear its address in this field and click “Apply”. Note If your NTP server is a domain name address, make sure you have configured the DNS Setting and chosen appropriate Default Gateway on Setup page  System tab Network www.acti.com...

  • Page 94: Synchronize With Client Computer's Time

    ENR-100 Series System Administrator’s Manual Synchronize with Client Computer’s Time Click to synchronize the device time with the time on the computer you are using now, please click this button. www.acti.com...

  • Page 95: Configure Network Settings

    Go to Setup page  Network tab. IP Settings On Network tab, click “Network Connection” then select the interface card that you wish to set up. After setting up, please click “Save” on the bottom right side to save the settings. LAN1 Configuration LAN2 Configuration www.acti.com...

  • Page 96: Enable Dhcp Server

    2. Set the Beginning IP Address and Ending Address, and click “Save”. ENR will assign IP addresses within this range to the cameras connected to the selected LAN port. Please (1) make sure the cameras are in DHCP client mode, (2) connect and power the cameras up after you enable this service. www.acti.com...

  • Page 97: Set Http Port

    DDNS provider’s server. 1. Visit the dynamic DNS service provider’s website and register the domain name for your ENR. ENR supports the following service providers: DynDNS: http://www.dyndns.com ● NO-IP: http://www.noip.com/ ● 2. Go to Setup page  Network tab click “DDNS”. www.acti.com...
  • Page 98 ENR-100 Series System Administrator’s Manual 3. Check “Enable”, select the service provider, and input the Host Name, User Name and Password. 4. Click “Save” to save the settings. www.acti.com...

  • Page 99: Set E-Mail Notification Service

    Hotmail account name is a complete e-mail address, while other e-mail servers’ may be not. Only alphabets, numbers, and the symbols (@), (.), (_), (-) are valid. Password Input the password of the SMTP server account. Only alphabets and numbers are valid. www.acti.com...

  • Page 100: Live Screen Event List Setting

    SMTP server to check incoming e-mails. Live Screen Event List Setting The max number of latest events that can be displayed in event panel. Default is 100. You can configure this setting on Setup page  System tab Parameter. www.acti.com...

  • Page 101: Live Page Ui Overview

    PTZ camera channel is selected on live view display area. Your current logged on Account name Layout Selection Buttons Click to change the current layout Patrol Click to start/stop sequence patrol Page Selection Click on the numbers to view a row of available pages: www.acti.com...
  • Page 102 Share Current View to Local Click to start sharing your current view to local screen Screen Switch Switch to the Setup or Playback page by clicking the tags. Current System Time Toolbar Lists available tools for your current page www.acti.com...

  • Page 103: Set Cameras

    ENR remote user interface also allows you to easily configure, add or delete cameras without individually opening the cameras’ web configurator. Add Cameras Go to Setup page  Camera tab. 1. As there is currently no camera existing in ENR system, click “Add” to starting adding the first one. 2. Click “Search Cameras” www.acti.com...
  • Page 104 “Search”. After all the connected cameras are found, click the cameras and then “Submit” to add them. 2. Back on the All Cameras list, the selected cameras are already added into ENR system and started their full-time recording service. www.acti.com...
  • Page 105 Password, HTTP Port, and click “Get Camera Settings”. 2. The camera properties including Firmware version and Serial Number will appear below, you may modify other video configurations and then click “Save”. Click “Save”, the camera’ s live view will appear. www.acti.com...
  • Page 106 You may connect a camera via RTSP protocol. Via this mouthed, you can add a video stream from any brand camera. Fill in the properties such as properties IP Address, URI type, RTSP Port, Protocol type, User name, Password, and click “Save”. www.acti.com...

  • Page 107: Copy Camera Settings

    1. On All Cameras list, select an existing channel. 2. Click “Duplicate”, the selected cameras will be duplicated to new channels. In the example shown below, 01 Camera will be copied to a empty channel – 07 camera. Source www.acti.com...

  • Page 108: Delete Cameras

    To modify the video format and transmission properties including Stream Mode, Channel ID, Resolution, Protocol, Encoder, Frame Rate, and Bitrate, you will have to click “Get Camera Settings” first to sync with the camera first. After configuration, click “Save” to save this setting to camera www.acti.com...

  • Page 109: (B) Motion Settings

    Adjustment Attributes Field Name Description Sensitivity(1-100) Determines how sensitive the camera reacts to the movement. The higher the sensitivity level is, the smaller motion will trigger the alarm, but may give false alarms. Default is 70. www.acti.com...

  • Page 110: (C) Fine-Tune The Image: Brightness/Contrast/Saturation/Hue

    For devices that support these property configurations, you may directly modify them and save to the device ENR interface. On Video Adjustment window, the fields available for modification (depends on models) will be enabled. Select the desired value for the field, and click “Apply”. www.acti.com...
  • Page 111 1/25s, 1/50s, 1/100s, etc. It is necessary to have the camera’s Line Frequency adjusted according to the power frequency of the light source to avoid flickering effect. www.acti.com...

  • Page 112: Configure Ptz Preset Points

    Pan and Tilt speed. The farther you place the cursor from the center, the faster the Pan/Tilt movement.  To execute optical Zoom in or Zoom out, scroll the mouse wheel forward to zoom in; scroll the mouse wheel backward to zoom out. Pan/Tilt Zoom in Zoom out www.acti.com...

  • Page 113: Configure Ptz Preset Tour

    “Add”, this preset point will be added to the tour. Continue to add other preset points in your desired movement sequence and click “Save”. After a tour is saved, it is available on Live pagePreset Point control panel. www.acti.com...

  • Page 114: Configure Fisheye Cameras

    The dewarping takes places in camera before the video is output to NVR server. Since the image correction counts on the camera itself, NVR server will not bear much extra loading, which benefits the system requiring many of these fisheye cameras (e.g. ACTi KCM-3911, KCM-7911) ...
  • Page 115 Original View The very raw fisheye view Digital PTZ One large user-defined cropped area Dewarping ePTZ 360-degree panorama view for ceiling mount 180-degree panorama view for wall mount Digital PTZ Panorama Two 180-degree panorama views Double Digital PTZ Panorama www.acti.com...
  • Page 116 1. Local Live and Playback can only display the original video stream output from a fisheye camera. 2. Whichever fisheye view mode you are watching on remote interface, ENR will record the original video stream output from a fisheye camera; however, you may export the video in any desired view mode. www.acti.com...

  • Page 117: Set Recording Schedule

    Go to Setup page  Schedule tab, and select a camera to configure its recording schedule. Event-Recording File Length Before setting the recording schedule, you may define the length of an event recording. To do this, configure the following properties shown as below, which will make an event recording as long as 10+30 second: www.acti.com...

  • Page 118: Set The Recording Schedule

    The Event Schedule defines when the event handling is activated. To set the event rules, please refer to Set Event Rules on page 120. By default, the event handling is full-time activated; you may disable it for a certain period. www.acti.com...

  • Page 119: Copy Schedule

    On the bottom of this page, click “Copy” to bring up Copy Schedule window. Select one camera as the source of schedule, and add other cameras to the “To” field. Click “Copy” to commit changes. www.acti.com...

  • Page 120: Event Management

    1. Click “Set” to enter the rule content. 2. Select your desired response type, configure the properties and then click “OK” to save this rules. There are two types of response for a system event: Beep and Send Mail. www.acti.com...

  • Page 121: Set Camera Event Rule

    Whenever any encounter certain events (including detected motions, detected DI triggers, network loss and network recovery) ENR will trigger a response based on the rule you set. Select a camera and then click “Set” of your desired event type. www.acti.com...
  • Page 122 2. Select your desired response type, set the details and click “OK” to save the rules. To delete a certain response, simply de-select it from the response window, and then click “OK”. 3. After all the rules are set, click “Save” on Event tab to save all settings. www.acti.com...

  • Page 123: Response Types

    Set the DO to become ON or OFF upon trigger, only the devices supporting DO functions are available. Select the device whose connected DO(s) will be triggered. You may select one DO to be activated after the other and the duration time between them. www.acti.com...
  • Page 124 Notification Service on page 99) beforehand. Enlarge Local Live screen will display certain channel view in full screen for a while when the system is triggered. Select the camera whose live view will be enlarged on Live screen and the duration time. www.acti.com...

  • Page 125: Copy Event Rules

    You may copy a camera’s event rules to other multiple cameras. This saves much your time on setting up rules one by one. On Event tab, click “Copy” Select one camera as the source of schedule, and add other cameras to the “To” field. Click “Copy” to commit changes. www.acti.com...

  • Page 126: Clear Event Rules

    On Event tab, you may select an event rule under certain camera, and click “Clear” to delete To directly clear all event rules set under a certain camera, click “Clear This”. You may also clear all the rules in ENR system by clicking “Clear All”. Please remember to click “Save” after deleting any rule. www.acti.com...

  • Page 127: Disk Management

    Please note that the system will stop recording during the disk formation. If you have to format a disk having been recording for a while, it is suggested that you export important video and system log in advance. www.acti.com...

  • Page 128: Set Maximum Recording Days

    Please 1. Click “Disable” next to Recordable status to stop the system from saving recording into 2. Immediately export important video and system log, and then replace the disk following the instructions Manage Abnormal Disks on page 63. www.acti.com...

  • Page 129: Upgrade Firmware

    ENR-100 Series System Administrator’s Manual Upgrade Firmware You may check ACTi corporate website for latest ENR firmware package and download it. Unzip the package and save the *.upg file to your client computer. 1. Make sure there is a recordable hard disk installed in ENR or a USB disk with at least 200MB space connected to ENR.

  • Page 130: Backup / Restore Settings

    To start backing up system setting, please insert a USB disk into ENR first. 1. Go to Setup page  Maintenance tab Settings Backup / Restore. Click “Backup”, the backup file will be saved to your client computer as .nvr file. www.acti.com...

  • Page 131: Restore

    .nvr backup file in it, and the backup file is saved in the root directory. Go to Setup page  Maintenance tab Settings Backup / Restore. 2. Click “Browse”, find the target *.nvr file and click “Open”. 3. Click “Restore” to start restoring the settings. www.acti.com...

  • Page 132: User Group Management

    1. Enter Group , click “Add Group” to bring up Add New Group window, enter the Name and Description of the group, and click “OK” to add it to the Group List. Enter Permission, and select the group from Group list, enable the permissions possessed by this group. www.acti.com...

  • Page 133: Edit / Delete A Group

    Click “Save” to save the group settings. Edit / Delete a Group You may edit an existing Group or delete it. Select the user on Group List, click “Edit” or Delete”. Please always click “Save” before leaving this page. www.acti.com...

  • Page 134: Add A User

    3. Both the Account and Password field are non-case-sensitive. Edit / Delete a User You may edit an existing user or delete it. Select the user on User List, click “Edit” or Delete”. Please always click “Save” before leaving this page. www.acti.com...

  • Page 135: Joystick

    3. There are 12 buttons available on each controller; you may assign a function selected from dropdown list to any button. Every time you change the settings on this page, please click “Save” to save the settings of this joystick model. www.acti.com...

  • Page 136: System Log

    / restore system configuration, modify recording User schedule, modify time, modify e-mail server settings, modify system information, Behaviors modify network settings, modify user &permissions, import language file, modify workspace parameter By changing the criteria, the result will automatically refresh accordingly. www.acti.com...

  • Page 137: Export System Log

    ENR-100 Series System Administrator’s Manual Export System Log To export the logs, click “Export” and save the xml file to your local computer. You may view this file with Notepad or XML Editor. www.acti.com...

  • Page 138: Customize Live Screen Layout

    Push the current view to local live view. By doing this, a new local customized view will be created to display this view. Please make sure there is no blank channel in your current remote live view. Watch all camera views Layout Selection Buttons Patrol Switch www.acti.com...

  • Page 139: Execute Sequence Patrol

    Set a Default View You may also set one View as default, in this way, you may immediately start live monitoring after logging in to the system. To set a default view, simply select a desired view on View list, and click www.acti.com...

This manual is also suitable for:

Enr-120Enr-130Enr-140

Table of Contents