Changing The Machine Settings Using The Operation Panel - Canon MB5000 Series Online Manual

Changing the Machine Settings Using the Operation Panel

This section describes the procedure to change the settings in the Device settings screen, taking the steps
to specify Prevent paper abrasion as an example.
1. Make sure that the machine is turned on.
2. Flick the HOME screen, then tap
Using the Operation Panel
3. Tap Device settings.
The Device settings screen is displayed.
4. Tap the setting item to adjust.
The setting screen for the selected item is displayed.
5. Tap the setting item.
6. Tap the setting to specify.
Setup.
248