Cleaning The Exterior Of The Machine - Canon MB5000 Series Online Manual

Hide thumbs Also See for MB5000 Series:

Table of Contents

Cleaning the Exterior of the Machine

Be sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.

Smooth out wrinkles on the cloth if necessary before cleaning.

• Be sure to turn off the power and unplug the power cord before cleaning the machine.

• The power cannot be turned off while the machine is sending or receiving a fax, or when unsent

faxes are stored in the machine's memory. Make sure if the machine completed sending or

receiving all the faxes before unplugging the power cord.

• The machine cannot send or receive faxes when the power is turned off.

• If the power cord is unplugged, all documents stored in the machine's memory will be lost. Send or

print a necessary document, or save it on a USB flash drive before unplugging the power cord.

• Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not

to scratch the surface. Paper tissue powder or fine threads may remain inside the machine and cause

problems such as print head blockage and poor printing results.

• Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean

the machine, as this may cause a malfunction or damage the surface of the machine.

• When cleaning the touch screen, be sure to use a soft cloth, such as eyeglasses cleaning cloth, to wipe

off dirt on the surface. Do not apply excessive pressure. Never use cleaners containing organic

solvents to wipe the touch screen.