Table of Contents
Advertisement
[STATUS]
Displays the status of the projector.
1)
Press as to select [STATUS].
2)
Press the <ENTER> button.
f The [STATUS] screen is displayed.
3)
Press qw to switch the pages.
f The page will change each time you press the button.
[INPUT]
[SIGNAL NAME]
[SIGNAL FREQUENCY]
[PROJECTOR RUNTIME]
[INTAKE AIR TEMP.]
[OPTICS MODULE TEMP.]
[NUMBER OF ENTRY
SIGNAL]
[EMULATE]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[MAIN VERSION]
[SUB VERSION]
[NETWORK VERSION]
Note
f The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector.
Setting time zone
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [TIME ZONE].
4)
Press qw to switch [TIME ZONE].
Setting the date and time manually
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
5)
Press as to select an item, and press qw to set the local date and time.
6)
Press as to select [APPLY], and press the <ENTER> button.
f The setting of the time will be completed.
80 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the input terminal currently selected.
Displays the input signal name.
Displays the frequency of the input signal.
Displays the operation times of the projector.
Displays the status of the air intake temperature of the projector.
Displays the status of the internal temperature of the projector.
Displays the number of registered signals.
Displays the [EMULATE] settings.
Displays the type of the projector.
Displays the serial number of the projector.
Displays the main version of the firmware of the projector.
Displays the sub version of the firmware of the projector.
Displays the network version of the projector.
Advertisement
Table of Contents
