Husky T-124C Owners Manual And Assembly page 24

24
Drive-side axle and wheel
Drive-side Hub Cap & Bolt Freewheel-side Hub Cap & Bolt
Mount freewheel side wheel on the left axle. Make sure that the
spacer is placed between the wheel's sealed bearing and axle
bearing (for T-124C only). T-326 does not require a spacer
washer. Replace the washer and tighten the axle nut.
Spacer
T-124C Freewheel side T-326 Freewheel side
Before mounting the front wheel, attach the front fender to the fork
and secure the two fender braces to the front fork using the
machine screws on the fork's dropouts. Mount the wheel on the
front fork. Once you have mounted the wheel, tighten the axle
nuts.
STEP 3 - Handlebar, Brake, Pedals, Saddle
HANDLEBAR - Attach the handlebar stem by inserting it into head
tube. Adjust the stem height but DO NOT EXTEND BEYOND
"MINIMUM" MARK. Secure the stem bolt but do not tighten yet.
Place the handle bar on the stem, adjust the handlebar to desired
position and tighten the stem clamp screw. Now you can tighten