Husky T-124C Owners Manual And Assembly page 17

17
T-326 Axle and Pillow Block Bearing
3-SPEED OPTION - Models with 3-speed coaster brake hub use
Shimano® Nexus® internal gear shifting system that is pre-set and
adjusted at the factory. Components unique to a 3-speed model are (1)
3-speed handlebar grip shifter, (2) shifter cable, (3) bell crank, and (4)
push rod. When assembling the tricycle, make sure you insert the push
rod before attaching shifter cable bell crank to the hub axle. Attach bell
crank to the right side of hub axle over the axle nut and make sure the dial
glass is visible when looking vertically down over the hub. Tighten the
retainer bolt after the bell crank is properly seated on the axle nut. There
is no need to adjust the bell crank as it is pre-set at the factory.
IMPORTANT!
Push rod is packed with small parts and pictured below. It is
important to insert the push rod into axle before attaching the bell
crank. Shifting will not occur without the push rod.
Bell Crank
Push Rod