Table of Contents
Advertisement
3. BASIC OPERATION
3.1 Live Page
Icon
Function
Live audio channel (1~4)
Digital zoom on
Network disconnected
USB mouse connected
Key lock
Administrator
Motion
Record mode: Frame
3.2 Record Icon
1)
Manual Recording
By defaults, manual recording is on (
2)
Event Recording
When the motion detection or alarm is on, the motion icon (
motion or alarm event.
3)
Timer Recording
When timer recording is on, you will see "
4)
HDD Overwritten
Be defaults, the HDD overwritten function is set to ON, and " " will be shown on the screen.
3.3 Playback
Click "
" on the quick menu bar to display the playback control panel, and click
video clip, or click
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the
device will stop playback. For example, if the IPS is set to 30, the recording time should be at least
273 seconds (8192 images / 30 IPS) for the playback to work properly.
Icon
Function
Playback audio channel (1~4)
Digital zoom off
Internet connected
USB flash drive / device connected
PTZ mode on
Operator
Recording
Record mode: Field
) when the DVR is powered on and a HDD is installed.
" on the screen.
to enter the search list.
) or alarm icon (
5
Icon
Function
Audio channel off
Timer recording
LAN connected
No USB device connected
HDD overwrite
Sequence
Alarm
Record mode: CIF
) shows on the screen for any
to play the latest recorded
Advertisement
Table of Contents
