Ubiquiti AG-HP-2G20 Quick Start Manual page 6

2 ghz high-performance integrated innerfeed antenna

Hide thumbs Also See for AG-HP-2G20:

Table of Contents

3. Attach the Rear Housing:

a. Ensure the four alignment holes on the Grid Reflector

and L-Bracket are lined up.

b. Orient the Rear Housing with the locking tab of the

cable feed door facing up.

c. Insert the alignments pins of the Rear Housing into the

alignment holes, and push until the Rear Housing locks

into place with a click.

Vertical Polarization

4. Insert the Feed Extender into the Rear Housing with the

Release Button facing down. Push until it locks into place

with a click.

Release Button

Horizontal Polarization

Table of Contents