2
2.3
Quick installation of the fax driver
Installation flow
The following explains the system setup flow to enable PC-Fax TX from the PC.
1
Prepare the fax driver.
% Prepare the DVD-ROM disk.
% Check the operating system (OS) version that supports the fax driver.
Ensure that the operation requirements of the fax driver are satisfied by the PC where you install the fax
driver.
2
Install the fax driver on the PC.
% Install the fax driver on the PC using the installer.
Mount the DVD-ROM disk on the drive, and install the software by following the on-screen instructions.
% Carry out a test print.
Carry out a test print and verify that it is acceptable.
3
Preparation has finished.
Check the operating system (OS) version that supports the fax driver
For details on the PC's Operating System (OS) that supports the fax driver, refer to page 1-4.
2-6
Quick installation of the fax driver
d-Color MF552/452/362/282/222
2.3