Pioneer HTZ-323BD Operating Instructions Manual page 23

Wall mounting the speaker for
HTZ-323BD/HTZ-322BD
The surround speakers (HTZ-322BD only) and
the center speaker have a mounting hole which
can be used to mount the speaker on the wall.
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling.
Make sure that the wall you intend to mount
the speakers on is strong enough to support
them. Do not mount on plywood or soft surface
walls.
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
Caution
• If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
• Pioneer is not responsible for any accidents or
damage that result from improper installation.
• Surround speaker (HTZ-322BD only)
Mounting screw
(not supplied)
5 mm
10 mm
5 mm to 7 mm
This hole is used to x the unit to the
speaker stand.
Caution: Do not use this hole to mount on
walls or ceilings. The speaker may fall resulting
in injury.
• Center speaker
5 mm
10 mm
Mounting screw
(not supplied)
5 mm to 7 mm
Connecting 23
En
2