Connecting; Assemble The Speakers; Speaker Setup For Htz-323Bd/Htz-322Bd - Pioneer HTZ-323BD Operating Instructions Manual

Chapter 2

Connecting

Assemble the speakers

Speaker setup for HTZ-323BD/
HTZ-322BD
Preparing the speakers
1. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
2. Attach the non-skid pads to the base of
each speaker.
• Surround speaker (HTZ-322BD only)
• Center speaker
3. Mount the front/surround speaker.
1 Insert the lower cabinet to the base so that
the cable hole is positioned at the backside.
2 Fix the base to the lower cabinet from the
underside, using the four screws (M4 x 16).
Connecting 21
En
Non-skid pads
Non-skid pads
2