Folding The Handle; Removing The Mower From Storage - Toro Recycler 20792 Operator's Manual

Folding the Handle

1. Remove the
lower handle knobs
and lock washers.
2. Detach the
handle brackets
(A) from the lower
handle sides.
m-8097
Note: Attach the lower handle knobs onto the
bolts in the handle to prevent losing them.
3. Rotate the handle forward.
A.
m-8110
B.
4. To unfold the handle, refer to Unfolding the
Handle on page 5.
Removing the Mower from
Storage
1. Remove the spark plug and pull the recoil start
handle a few times to blow the excess oil from the
cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N
m).
3. Connect the wire to the spark plug.
A
m-8109
3353-448 Rev A
15