Table of Contents
Advertisement
1 3 Programming Port and DIP Switch
1 3 Programming Port and DIP Switch
Front
Panel
TC, RTD, mV
Input 1
Input 1
0-1V, 0-5V, 1-5V, 0-10V
Select
Select
0-20 mA, 4-20 mA
All parameters are Unlocked
Only SP1, SEL1 SEL5
Lockout
Only SP1 is unlocked
All Parameters are locked
Factory Default Setting
Factory Default Setting
The programming port is used for off-line automatic setup and testing procedures only.
The programming port is used for off-line automatic setup and testing procedures only.
Don't attempt to make any connection to these pins when the unit is used for a normal
Don't attempt to make any connection to these pins when the unit is used for a normal
control purpose.
control purpose.
When the unit leaves the factory, the DIP switch is set so that TC & RTD are selected for input
When the unit leaves the factory, the DIP switch is set so that TC & RTD are selected for input
1 and all parameters are unlocked.
1 and all parameters are unlocked.
Lockout function is used to disable the adjustment of parameters as well as operation of
Lockout function is used to disable the adjustment of parameters as well as operation of
calibration mode. However, the menu can still be viewed even under lockout condition.
calibration mode. However, the menu can still be viewed even under lockout condition.
SEL1- SEL5 represent those parameters which are selected by using SEL1, SEL2,...SEL5
SEL1- SEL5 represent those parameters which are selected by using SEL1, SEL2,...SEL5
*
parameters contained in Setup menu. Parameters been selected are then allocated at the
parameters contained in Setup menu. Parameters been selected are then allocated at the
beginning of the user menu.
beginning of the user menu.
8
Access Hole
The programming port is used to connect to
SNA12A for automatic programming, also can be
connected to ATE system for automatic testing &
calibration.
*
are unlocked
DIP Switch
DIP Switch
:ON
:OFF
1
2
3
4
UM25001G
Rear
Terminal
Figure 1.3 Access Hole
Figure 1.3 Access Hole
Overview
Overview
Table 1.1 DIP Switch
Table 1.1 DIP Switch
Configuration
Configuration
Hide quick links:
Advertisement
Table of Contents
