Table of Contents
Advertisement
IN THE FIELD TECHNIQUES (continued)
Swing the search coil slowly,
overlapping each sweep as you
move forward. It is important to
sweep the coil at a consistent
speed over the ground as you
search. After identifying a target,
your sweep technique can help in
identifying both the location and
the nature of the target.
encounter a weak signal, try
moving the coil in short, rapid
sweeps over the target zone; such
a short rapid sweep may
provide
consistent
identification.
Most
WHAT
READS
LIKE THIS
16
If you
a
more
target
worthwhile
objects
will
respond with a
repeatable
tone.
If the
signal does
not repeat
after
...MAY
ACTUALLY
BE THIS
sweeping the coil directly over the
suspected target a few times, it is
more than likely trash metal.
Crossing the target zone with
multiple intersecting sweeps at
multiple angles is another way to
verify the repeatability of the signal,
and the potential of the buried
target. To use this method, walk
around the target area in a circle,
sweeping the coil across the target
repeatedly, every 30 to 40 degrees
of the circle, about ten different
angles as you walk completely
around the target. If a high-tone
target completely disappears from
detection at a given angle, chances
are that you are detecting oxidized
ferrous metals, rather than a silver
or copper object.
changes at different angles, you
many have encountered multiple
objects.
If you are new to the
hobby, you may want to dig all
targets at first. With practice in the
field, you will learn to better discern
the nature of buried objects by the
nature of the detector's response.
If the tone
Advertisement
Table of Contents
