Advertisement
LP Tank Leak Test
For your safety
• Leak test must be repeated each time LP tank is exchanged or refilled.
• Do not smoke during leak test.
• Do not use an open flame to check for gas leaks.
• Appliance must be leak checked outdoors in well-ventilated
area, away from ignition sources such as gas fired or
electrical appliances. During leak test, keep appliance away
from open flames or sparks.
Use a clean paint brush and 50/50 soap and water solution.
Use mild soap and water. Do not use household
cleaning agents.
Damage to gas train components can result.
Brush soapy solution onto all weld seams and entire valve area.
If "growing" bubbles appear, do not use or move the LP tank. Contact an LP gas supplier
or your fire department.
Connecting Regulator to the LP Tank
1. Place LP tank on a secure, level,
and stable surface.
2. Turn control knob to the OFF position.
3. Turn LP tank OFF by turning hand wheel
clockwise to a
full stop.
4. Remove the protective cap from the LP tank
valve. Always use cap and strap supplied
with valve.
WARNING
Do not use a POL transport plug (A) (plastic part with
external threads)! It will defeat the safety feature of the valve.
A
Off Clockwise
Safety Relief
Valve
Strap and cap
OPD Hand
Wheel
Type 1 outlet
with thread
on outside.
9
Advertisement
