Remote System Configuration; Mobile Surveillance; Windows Mobile Pro - Q-See QT454 User Manual

7.9 REMOTE SYSTEM CONFIGURATION

Clicking on the Config tab in the Main Menu of the Remote Live Viewer will change the
display to where the user can set-up or alter the operating parameters of the DVR. Available
functions include the ability to configure; Basic, Live, Record, Schedule, Alarm, Network,
PTZ and User settings. Select an item from the submenu on the left and the appropriate
window will open to the right. While one user is changing settings, other users are blocked
from doing so.
Main Menu
Sub Menu
PICTURE 7-77
The list of available functions and their options are identical to those on the DVR. Please refer
to CHAPTER 4 of this manual, "Main Menu Setup Guide" for more details.
Be sure to click on Apply to save your settings before exiting any window. Default will restore
the original settings.
84

MOBILE SURVEILLANCE

This DVR supports mobile surveillance on smart phones and other devices running Android,
Blackberry,Symbian and Windows Mobile Pro operating systems along with the iPad and
iPhone on 3G networks. To access the DVR from these devices you must have first configured
the Network Settings on the DVR as shown in SECTION 4.6.

8.1 WINDOWS MOBILE PRO

Windows Mobile Pro 6.1 and 6.5
STEP 1. Activate mobile network access on the
mobile phone.
STEP 2. Run Internet Explorer
STEP 3. Input the DVR's IP address or DDNS
domain
STEP 4. You will be asked to download the
software PCam. Click on the software name
to open the download dialog pop-up
STEP 5. Click Yes to start downloading and
installing.
CHAPTER 8
PICTURE 8-1
PICTURE 8-2
85