Using The Remote Access Software; Live View - Q-See QT454 User Manual

7.7 USING THE REMOTE ACCESS SOFTWARE

When you first connect to the DVR via Internet Explorer – whether from within the network
or over the Internet – you will be prompted to download a webcam program to access the
cameras with the following message in the information bar at the top of the page:
This website wants to install the following add-on: 'WebClient.cab' from 'Digital
Peripheral Solutions Ltd.'..."
Click on the bar to accept this file and upon completion of the download you will be presented
with a login window. Enter your User Name and Password that are stored on the DVR. You will
then see a screen showing the camera views and controls.
The various functions available in this Remote Live Viewer are broken down by the tabs
along the top of the window; Live, Search, Backup, Config, Tools and Info.

LIVE VIEW

PICTURE 7-67
Live Viewer symbol and function definitions:
1 Channel Indicator 2 Screen Display Mode
4 Snap Picture 5 Start Manual Record
7 Bidirectional Talk 8 Playback
10 PTZ Control 11 Master/Sub Stream Status
74
3 Volume
6 Client Record
9 Color
Screen Display Mode
Clicking on the arrow beside the screen
display mode will open the Channel Select
dialog which will allow you to specify which
channels are shown. Channels can be
selected individually or in blocks of four.
Record and Playback Controls
Buttons 4 through 8 shown in Picture 7-33 allow you to save real-time still and video images
to your computer.
Clicking on the Snap icon will capture still images and save them to the computer.
Record will begin remote manual recording of all active channels onto your DVR.
Client Record will capture video and save it onto your computer's hard drive.
Star Talk allows you to communicate through any connected camera which also has a two-
way audio feed. This optional equipment must be added before this feature is available.
Local Playback lets you review the Client Record video stored on your computer's hard drive.
PICTURE 7-69
The destination for the still images is set in the Config tab in the main menu at the top of the
Remote Live Viewer (See Section 7.8) which will open the Local Config sub menu.
You can also set the number of images that are captured when the Snap Pictures button
is pressed. This window is also used to set the destination for recordings made from within
the Remote Live Viewer as well as how many audio channels (if available) are recorded in
addition to which camera channels.
PICTURE 7-68
75